Most wasp problems return because only the visible nest was treated. Secondary nests, void nests, and ground nests on the same property continue the population. Show Me Pest Control performs a complete property nest sweep before any treatment begins in Corning.

Protective protocol matched to the threat level of the specific nest type.
Most wasp problems are multi-nest situations. Treating only the visible one leaves the secondary nests intact. We check all potential nesting sites on the first visit -- not because something went wrong, but because that is how the job is done correctly.
Different nests require different protective approaches. A paper wasp nest under an eave is a low-to-moderate threat. A yellow jacket ground nest at your kids' play structure with 3,000+ workers is a different situation entirely. We match the protective protocol to the threat level.
When wasps are nesting inside a wall or attic, the entry point spray approach leaves the vast majority of the colony untreated. We access the void -- through the interior if necessary -- inject the correct product directly into the nest chamber, and seal the entry after the colony has been eliminated.
Treated nesting sites without a residual barrier become next year's nesting sites. We apply residual product to all treated locations -- eave surfaces, ground openings, former void entries -- so that returning queens cannot re-establish. The prevention step is what makes wasp removal last more than one season.
Paper wasps are the most common stinging insect encountered by homeowners in Corning, AR. They build open, umbrella-shaped combs -- visible hexagonal cells without a paper envelope surrounding them -- typically under eaves, in window frames, inside porch ceilings, and along fence tops. Paper wasps are not aggressive by nature and will not attack unless the nest is directly handled, struck, or approached to within about 12 inches. A single paper wasp colony typically contains 20 to 100 workers and dies off naturally as temperatures drop in fall, with the colony queen overwintering in protected sites. The nest will not be reused the following spring -- but a new queen may establish a new nest in the same location. Most homeowners significantly over-react to paper wasp nests and would benefit from understanding that a nest in a low-traffic location poses minimal risk. The real concern is a nest directly over a doorway, at a play area, or in a location where people regularly pass within arm's reach.
Yellow jackets are what most people mean when they say wasps, and they are the species responsible for the majority of serious stinging incidents. Their nesting behavior ranges from ground nests -- holes in soil or under landscape features -- to void nests inside walls, soffits, and attic spaces. Ground nests are particularly dangerous because the entrance is often concealed at ground level and the defensive zone surrounding the entrance is large. A person mowing a lawn, a child playing in the yard, or an adult working near a landscape bed may not see the nest entrance before they enter the defensive perimeter. Yellow jacket stings are painful, multiple, and can produce serious allergic reactions in sensitized individuals.
Identifying a bald-faced hornet nest versus other paper nests is important because the treatment protocol -- and the safety profile for the person attempting treatment -- is significantly different. The enclosed gray paper envelope is the key visual identifier. Bald-faced hornets will exit the nest and pursue a threat at distances that paper wasps will not. Do not approach the nest within 10 to 15 feet without protective equipment. If the nest is in a tree near an active area of the yard, near an entrance, or in a location where children or pets will be nearby, same-day service is appropriate.
Wasps entering your walls or soffits in Corning? Call +1-866-315-0243. Our technicians in Corning respond fast to active nest situations -- especially near entry points and children's areas.
The most problematic wasp situation from a DIY treatment standpoint is the void nest -- a yellow jacket colony established inside a wall void, soffit cavity, or attic space. Void nests are identified by a consistent entry point through a gap, crack, or opening in the exterior of the structure -- typically a wood joint, a gap in vinyl siding, or an opening around a pipe or conduit penetration. The number of workers entering and exiting the entry point is a reliable indicator of colony size and maturity. A large void nest may have a substantial buzzing sound audible from inside the adjacent room. Spraying the exterior entry point with consumer knockdown spray addresses only the guards at the entrance -- it does not reach the nest chamber inside the void, and it agitates the colony while leaving the population intact. The workers inside increase their defense activity, and the colony may begin exiting through secondary entry points deeper in the structure. The correct approach is void injection -- applying insecticide directly into the nest chamber through a small access point -- followed by sealing the primary entry after the colony is eliminated.
The fall window after natural colony die-off is the right time to apply residual to recurring nesting sites. Eave surfaces where paper wasp combs have been removed year after year, attic ventilation screens with prior yellow jacket activity, and foundation areas near prior ground nest sites all benefit from post-season residual application. It prevents the queen that overwinters from re-establishing at the same location -- the most predictable source of next year's nest problem. For properties with structural vulnerabilities -- gable vents, attic ridge vents, deteriorated fascia board gaps -- we assess those sites at the same time and discuss whether exclusion repairs would further reduce re-entry risk in future seasons.

Same-day response for active wasp and hornet nests in Corning. Call and we confirm arrival before you hang up.
Call +1-866-315-0243Six services covering every nest type and situation -- from paper wasp eave removal to yellow jacket void injection.

Eaves, ground areas, tree structures, and all exterior surfaces checked before treatment begins. Multiple nests found on most properties.
Treatment includes removal and the residual application that prevents next-season re-establishment at the same site.
Ground nest treatment with full protective gear, correct product application to the nest interior, and entrance sealing to prevent reuse.
Gray enclosed paper nest treatment with maximum application distance and full protective equipment. Bald-faced hornets are highly aggressive near the nest -- safe treatment requires distance and protocol that consumer products cannot provide safely.
The entry-point spray fails for void nests. We access the nest chamber directly, treat at the source, and seal the entry.
Fall application of residual insecticide to prior nesting sites -- eave boards, gable vent edges, former ground nest entrances, and soffit gaps -- to prevent spring queen establishment at the same location.
Clear process, confirmed on the call.
Describe what you see -- nest type, location, proximity to people. We assess the threat level on the call and confirm same-day availability in Corning.
No technician is dispatched without full protective gear for the threat level involved. The equipment arrives with the technician.
Every potential nesting site on the property is checked before treatment begins -- all eave lines, ground areas, tree structures, and exterior openings. Secondary nests are documented and included in the treatment plan.
Treatment sequence is determined by nest type and location -- the correct order minimizes defensive response cross-contamination. Residual applied to prevent re-establishment.
Three different nest types, three different protocols, three problems solved.
I found the ground nest when I was nearly on top of it. Called Show Me Pest Control immediately. Same-day service on a Sunday. Technician found two additional nests during the sweep. Every nest treated. No stings at pickup the next day.
Attempted to spray what I thought was a wasp nest. Got stung 11 times before I got back inside. Show Me Pest Control identified it as bald-faced hornets -- a completely different threat level than I understood. Treated correctly. Inactive within 15 minutes. I had no idea there was such a difference between nest types until this happened.
The soffit spray was not working and the contractor could not explain why. Show Me Pest Control confirmed a void nest the moment they looked in the attic. Treated directly, sealed the entry. First season without stings at the entrance in two years.

Show Me Pest Control in Corning: same-day response, all nest types, correct protocol. Call +1-866-315-0243.
Call +1-866-315-0243 -- Same Day